重锤式破碎机

重锤式破碎机
Heavy hammer crusher
     

     重锤式破碎机是目前行业内锤式破碎机系列中技术较好的的一种设备，实现一次投料成型，具有效率高、节能环保之特点。成料能按照需求进行调整，粗、中、细；无片状、无光滑体、多角多棱保证抗压强度。特别适应于高速公路，建筑及大型工程用料。现在广泛应用于矿山、冶炼、建材、公路、铁路、水利和化学工业等众多行业，特别适用于破碎石灰石及抗压强度低于200Mpa中等硬度物料，一次成型，无需二级破碎整形过程，可以降低成本40%左右，耗能低，花费资金少。

The heavy hammer crusher is a kind of equipment with better technology in the current industry. It can realize one-time feeding molding and has the characteristics of high efficiency, energy saving and environmental protection. The material can be adjusted according to the demand, coarse, medium and fine; no flake, no smooth body, multi angle and multi edge to ensure the compressive strength. Especially suitable for highway, construction and large-scale engineering materials. Now it is widely used in mining, smelting, building materials, highway, railway, water conservancy and chemical industry and many other industries. It is especially suitable for crushing limestone and medium hardness materials with compressive strength lower than 200MPa. It can reduce the cost by 40% by one time without secondary crushing and shaping process, with low energy consumption and low cost.

产品性能
降低成本，耗能低： PCZ型重锤式破碎机破碎石料，一次成型，无需二级破碎整形过程，可以降低成本40%左右，耗能低、花费资金少。
石料应用广泛： PCZ型重锤式破碎机特别适用于破碎石灰石及抗压强度低于200Mpa中等硬度的石料。
运行安全可靠： 大直径主轴和重型化主机架，保证了设备坚固耐用，运行可靠。过铁保护装置和自动控制系统，可实现自动安全保护。
稀油润滑、可靠优异、提高使用寿命： 特别的稀油润滑系统设计，大大提高了设备使用寿命。高性能非接触式迷宫密封件无磨损，提高了阻挡粉尘的可靠性。

Product performance

Reduce cost, low energy consumption: PCZ type heavy hammer crusher crushing stone, one-time molding, no need for secondary crushing and shaping process, can reduce the cost of about 40%, low energy consumption and less capital.

Stone is widely used: PCZ heavy hammer crusher is especially suitable for crushing limestone and stones with compressive strength lower than 200MPa and medium hardness.

Safe and reliable operation: large diameter spindle and heavy duty main frame ensure the equipment to be durable and reliable. Through iron protection device and automatic control system, automatic safety protection can be realized.

Thin oil lubrication, reliable and excellent, improve service life: special thin oil lubrication system design, greatly improve the service life of the equipment. The high performance non-contact labyrinth seal has no wear and improves the reliability of dust blocking.

工作原理

重锤式破碎机是破碎设备中的一种，也是目前行业内锤式破碎机系列中技术比较好的一种设备，采用优良的生产技术，实现一次投料成型，具有效率高、节能环保之特点。成料能按照需求进行调整，粗、中、细、各种规格齐全；无片状、无光滑体、多角多棱保证抗压强度。特别适应于高速公路，建筑及大型工程用料。该破碎机去掉了鄂式机的初破过程，成为大小物料一次完成破碎的新机型，产量大、效率高、动力小、节约了人力物力，降低了物料的破碎成本。该机破碎的石料，不但规格全，而且均匀清晰，是老式鄂破机和板锤破的替代产品。本系列产品适用于破碎各种中等硬度和脆性物料，如石灰石、煤等物料。主要用于水泥、矿山、选煤、发电、化工及建材行业。

working principle

The heavy hammer crusher is one of the crushing equipment, and it is also a kind of equipment with better technology in the current industry. It adopts excellent production technology to realize one-time feeding molding, which has the characteristics of high efficiency, energy saving and environmental protection. The finished material can be adjusted according to the requirements, with complete specifications of coarse, medium, fine and various specifications; no flake, no smooth body, multi angle and multi edge to ensure the compressive strength. Especially suitable for highway, construction and large-scale engineering materials. The crusher eliminates the initial breaking process of the jaw crusher, and becomes a new type of crusher to complete the crushing of large and small materials at one time. It has the advantages of large output, high efficiency, small power, saving manpower and material resources, and reducing the crushing cost of materials. The stone broken by this machine is not only complete in specifications, but also uniform and clear. It is a substitute for the old jaw crusher and plate hammer. This series of products are suitable for crushing various medium hardness and brittle materials, such as limestone, coal and other materials. It is mainly used in cement, mining, coal preparation, power generation, chemical industry and building materials industry.

技术参数
technical parameter