双级破碎机

     双级破碎机作为一种新型破碎设备，它在性能、结构、操作方面占有很大的优势，因此它备受用户青睐，该设备可以破碎白云石、玄武岩、铁矿石等许多种物料，并且具有物料适用性强，可利用价值高等特点，为用户操作出的经济价值也是相当惊人的，本文来详细介绍这款设备。

    As a new type of crushing equipment, double-stage crusher has great advantages in performance, structure and operation, so it is favored by users. The equipment can crush dolomite, basalt, iron ore and many other materials, and has the characteristics of strong material applicability and high utilization value. The economic value of operation for users is also quite amazing. This paper will give details Introduce this device.

双级破碎机优势：

1、设备采用高合金耐磨锤头，锤头锤柄组合使用，只换锤头，不换锤柄。

2、的移位调隙技术，锤头磨损后不需修复，移动位置反复使用，一副锤头可顶三副锤头使用。

3、破碎机双向转动，通过持续的等班次双向操作方式，可便锤头和破碎齿板之间均匀磨损，减少了停机更换易损件的频率。

4、适合脆性物料的细碎，不堵塞、粉尘少，噪音低。

5、双级破碎机缩短了物料在破碎腔内滞留的时间，提高了易损件的使用寿命。

6、设备整机安装方便，大大提高了设备的自由度。

Advantages of two-stage crusher:

1. The equipment adopts high alloy wear-resistant hammer head. The hammer head and handle are used in combination. Only the hammer head is replaced and the hammer handle is not changed.

2. With the technology of shifting and adjusting gap, it is unnecessary to repair the worn hammer head, and the moving position can be used repeatedly. One pair of hammer head can be used against three pairs of hammer heads.

3. The two-way rotation of the crusher, through the continuous two-way operation mode of equal shift, can facilitate the uniform wear between the hammer head and the crushing tooth plate, and reduce the frequency of stopping the machine to replace the vulnerable parts.

4. It is suitable for the fine crushing of brittle materials, no blockage, less dust and low noise.

5. The two-stage crusher shortens the residence time of materials in the crushing chamber and improves the service life of vulnerable parts.

6. The whole equipment is easy to install and greatly improves the degree of freedom of the equipment.

双级破碎机工作原理：

双转子上下两级粉碎互相串连的两套转子，使经上级转子击碎的物料即被飞速旋转的下级转子的锤头再次细碎，腔物料相互飞速碰撞，相互粉碎，达到锤粉料，料粉料的效果，成品直接卸出。

Working principle of two-stage crusher:

The upper and lower two-stage grinding of two sets of rotors connected with each other makes the materials crushed by the upper rotor be finely crushed again by the hammer head of the lower rotor which is rapidly rotating. The materials in the cavity collide with each other rapidly and crush each other, so as to achieve the effect of hammer powder material and powder material, and the finished product is directly discharged.

双级破碎机技术参数

Technical parameters of two stage crusher