反击式破碎机

反击式破碎机
Impact Crusher

用途及使用范围：
本 机 可 对 抗 压 强 度 不 超 过350MPa的各种矿石、 岩石（ 如花岗岩、大理石、石灰石）等物料进行粗、中、细碎作业， 广泛应用于公路、铁路、水利、电力、建筑等行业建设用砂石料的生产。

Usage and Application 
This machine is used for primary,secondary, fine crushing mining and rocks(for example, granite, marble, and limestone) materials with compressive strength less than 350 MPa. It is widely used for sand and rock producing in the industry of roads, railways, water conservancy projects, electricity power, building materials and so on.

工作原理：
反击式破碎机是利用冲击能来破碎物料的。当物料进入板锤作用区时，受到板锤的高速冲击使被破碎物不断被抛向安装在转子上方的反击装置上，然后又从反击衬板上弹回到板锤作用区重新被反击，物料由大到小在破碎腔内重复进行破碎，直到物料被破碎至所需粒度，由机器下部排出。
 
 Working Principle
The materials are crushed via impact energy produced in the crusher. When the materials enter the zone of the blow bar, they are flung into the impact equipments via the high-speed impact of the blow bar. These materials will be re-crushed  after rebounding into the impact plate. The process goes on until the materials are crushed to the required size and then will be discharged from outlet of machine.

性能特点：
1. 产品形状呈立方体，粒形好；
2. 排料粒度大小可调，简化破碎流程；
3. 高铬板锤，抗冲击、耐磨损，且冲击力大；
4. 无键连接，检修方便，经济可靠；
5. 结构紧凑，机器刚性强。

Features:
1. Cubic shaped end pro
2. Adjustable end products sizes, simple crushing process;
3. High chrome and abrasion resistant blow bar, powerful impacting force;
4. Non-key connected, easy maintenance, economical and reliable;
5. Compact construction, high efficiency.

主要技术参数

注： 技术数据如有变动， 恕不另行通知。Note: Any change of technical data shall not be advised additionally.